What it does
ZIP/UnZIP creates ZIP archives from files selected on your computer or extracts the contents of an existing ZIP archive. It supports two operations: create for building a new archive and unzip for opening an existing one. In create mode, you select one or more files and provide a name for the archive. In unzip mode, you select or drop a ZIP file, and the tool makes its contents available for download.
All processing takes place entirely in your browser. The archive is assembled and read locally, and no files are uploaded to a server. The tool uses the JSZip browser library to perform the ZIP work, but it does not call any backend endpoints. A downloaded ZIP archive is therefore a standard file that you can keep, send, or open with other archive software.
The interface provides the name field labeled ZIP filename (no .zip needed). The create and unzip operations are the only supported modes. There are no additional format choices, compression settings, or other options in the interface.
When to use it
- Package several files for sharing. Select documents, images, or other files, create a ZIP archive, and download it as one file. This is useful when recipients should receive a grouped set rather than separate attachments.
- Prepare files for transfer through a service with attachment restrictions. A ZIP archive may make several small files easier to handle as a single item, although the tool does not publish restrictions on individual files or a compression ratio.
- Extract a ZIP archive received from someone else. Use unzip mode to open a .zip file and download its contents without first saving a compressed copy to a folder manually.
- Unpack an archive on a computer where you do not want to install archive software. Because the operation runs in the browser, it can extract the archive using the browser itself. The tool does not state that extracted files are stored permanently, so you should download anything you need to keep.
- Handle sensitive files without sending them to a remote conversion service. ZIP/UnZIP performs its work locally, so the selected files do not leave your computer through the tool’s own processing.
- Create a clearly named deliverable. Enter a filename in the field labeled ZIP filename (no .zip needed) so the downloaded archive has a recognizable name.
- Check the basic contents of a ZIP file. Unzip mode provides a practical way to inspect and retrieve the entries in an archive before moving them into your regular working folder.
How to use it
- Choose the operation. Select create when you want to build a new ZIP archive, or unzip when you already have a ZIP file.
- Provide the files. In create mode, select the files you want to include from your computer. In unzip mode, choose a .zip file using the file picker or place it in the tool’s drop area.
- Enter the archive name when creating an archive. Type a name into the field labeled ZIP filename (no .zip needed). The interface explicitly says that the .zip extension is not required. The field contains the example text archive, which you can replace with your own name.
- Run the selected operation. Activate the control that performs the create or unzip action. The tool does not provide a separate published label for that control, and it does not update the output as you type; an explicit action is required.
- Wait for the browser to finish processing. ZIP creation or extraction happens locally. There is no server upload stage, although large archives can still take time for the browser to read or write.
- Download the result. In create mode, download the newly generated ZIP archive. In unzip mode, download the extracted file or files that you need from the archive.
- Open or keep the downloaded result as needed. The created archive can be opened with ZIP/UnZIP or with other software that supports ZIP files. Extracted files can be moved into your normal working location after download.
Worked example
Suppose you need to send two related documents, quarterly-summary.txt and attachment-notes.txt. Choose the create mode and select both files from your computer. In the field labeled ZIP filename (no .zip needed), replace the example text archive with quarterly-package. Then activate the create action and wait for processing to finish.
The expected result is a downloadable ZIP archive containing the two selected files. The filename field indicates that you should enter the archive name without adding .zip yourself; the resulting download is the ZIP archive identified by that name. If the browser cannot assemble the archive, the tool reports an error beginning with Failed to bundle: or Failed to create ZIP:.
Now suppose a colleague sends you quarterly-package.zip. Choose unzip, select that file with the file picker, or drop it into the supported drop area. The file input accepts files with the .zip extension and the application/zip media type. After extraction finishes, the archive’s entries are available for download. In this example, the expected content is quarterly-summary.txt and attachment-notes.txt.
If the selected file is not a ZIP archive, the tool can show Failed to read ZIP:. If no archive has been selected, it shows Please select a ZIP file. A ZIP archive that exceeds the tool’s stated 100 MB limit produces ZIP file exceeds 100 MB limit.
Limitations and edge cases
- A ZIP archive cannot exceed 100 MB for processing. The tool’s error message explicitly states ZIP file exceeds 100 MB limit. Use a different archiving tool for a larger archive or divide the material into smaller archives.
- The published limit set also includes 500 MB. The tool publishes 500 MB as a limit value, but it does not identify which operation or stage that value applies to. Do not assume that a file between 100 MB and 500 MB is accepted; the explicit ZIP-file error establishes the 100 MB boundary shown to the reader.
- There are additional numeric caps of 100, 1,000, and 500. The interface does not state how these values map to individual operations, file counts, or other measurements. The archive-too-many-files error includes a variable limit value, but the exact displayed number cannot be inferred without the interface state. If you need a known file-count ceiling, use a tool that publishes one directly.
- The output does not update while you type. You must explicitly run the selected operation after entering a filename or selecting files. There is no continuous preview of a newly named archive.
- The tool does not remember previous work between visits. It does not retain the last filename, selected files, extracted contents, or operation. Reloading or returning to the page later does not restore an earlier session.
- There is no built-in example archive. Although the filename field contains the example text archive, the tool does not ship sample ZIP data. You must provide your own files.
- There are no configurable archive options. The interface does not expose compression levels, encryption, passwords, file ordering, comments, or alternative archive formats. For encrypted or highly customized ZIP files, use a dedicated archive utility.
- Unzip mode is limited to ZIP input. The file picker accepts .zip files with the application/zip media type. RAR, 7z, TAR, and other archive formats are not accepted by that input.
Troubleshooting
- Problem: The tool says “Please select a ZIP file”.
Fix: Choose a file with the .zip extension in unzip mode, or place the ZIP file in the drop area. The field example archive is only a filename example and is not a ZIP file. - Problem: Extraction fails and the message begins with “Failed to read ZIP:”.
Fix: Confirm that the selected file is actually a ZIP archive rather than a file that merely has a .zip name. The tool does not accept other archive formats for extraction. - Problem: Archive creation fails and the message begins with “Failed to bundle:” or “Failed to create ZIP:”.
Fix: Retry with a smaller set of files or smaller source files. This can indicate that the browser could not finish assembling the archive; the published limits also include numeric caps whose exact operation-specific mapping is not stated. - Problem: The tool says “ZIP file exceeds 100 MB limit”.
Fix: Split the archive into smaller ZIP files or use a different archiving tool that supports files larger than 100 MB. - Problem: An archive contains too many entries.
Fix: Reduce the number of files included. The tool reports ZIP contains too many files (limit: ${MAX_FILE_COUNT}), with the limit populated according to the tool’s current value. If you need to work with an archive above that count, use a dedicated archive utility. - Problem: The expected download does not appear after entering a name.
Fix: Run the selected operation explicitly; the tool does not update the output as you type. Also check that at least one file has been selected in create mode.
Frequently asked questions
Are my files uploaded to a server? No. ZIP/UnZIP processes files entirely in the browser and calls no backend endpoints. Creating or extracting an archive does not send your files to a remote service through the tool.
What file types can I open for extraction? The file input accepts .zip files with the application/zip media type. It is not an input for RAR, 7z, TAR, or other archive formats.
Do I need to type .zip in the filename field? No. The field is labeled ZIP filename (no .zip needed), so enter the intended base name rather than adding the extension yourself.
Does the tool update the archive while I type its name? No. The output is not live. Enter the filename, select the necessary files, and explicitly run the create operation.
Is there a limit on ZIP file size? Yes. The tool explicitly reports ZIP file exceeds 100 MB limit. Its published limit set also contains 500 MB and the numeric caps 100, 1,000, and 500, but the interface does not clearly associate every value with a particular operation.
Can I configure compression or protect the archive with a password? No. The tool offers no compression settings, password option, encryption choice, or other archive-format options. Use a dedicated archiving program when those controls are required.
Will the tool remember my files or filename? No. It does not store state between visits. Download any output you need before leaving or reloading the page.
When should I use a different tool? Use another utility when you need to process ZIP files above 100 MB, handle a very large number of entries with a clearly published count limit, create encrypted archives, choose compression settings, or open an archive format other than ZIP. ZIP/UnZIP is best suited to straightforward local ZIP creation and extraction within its stated constraints.