What it does
This is a browser-based media conversion tool for video, audio, and image files. It accepts files from a computer through a file input and can also receive a file by drag-and-drop. The available media variants are aac, audio, image, jpeg, jpg, mp3, mp4, ogg, png, video, wav, webm, and webp. The file input is configured to accept video/*, audio/*, and image/* files.
All processing happens in the browser. The implementation uses @ffmpeg/ffmpeg and @ffmpeg/util, and the tool calls no backend endpoints, so the media file is not uploaded to a server. The completed result can be downloaded from the browser. There is no live or real-time processing, no automatic run when a file is selected, and no stored state between visits. A conversion is started only after the user explicitly initiates it, although the tool does not provide the wording of the control used to do so.
When to use it
- Converting an image that is available in PNG, JPEG, JPG, or WebP form into one of the image-related output variants offered by the tool.
- Converting a sound file in WAV, MP3, OGG, or AAC form when you need another audio container or encoding.
- Converting a video in MP4, WebM, or another accepted video type when you need a different video output format.
- Performing a local media conversion on a private file without sending the source to a backend service.
- Reducing the need for a full desktop media suite when a straightforward format conversion in the browser is sufficient.
- Downloading a converted result directly after processing rather than using an online service that requires files to be uploaded.
How to use it
- Prepare one video, audio, or image file that you want to convert. The file must be no larger than the published 500 MB limit.
- Open the tool in a browser and use the file input to open the file from your computer. The accepted categories are video/*, audio/*, and image/*.
- Alternatively, drag the source file onto the tool’s drop area. The tool has drag-and-drop support, so this is a valid alternative to using the file input.
- Select the desired output variant. The available variants are aac, audio, image, jpeg, jpg, mp3, mp4, ogg, png, video, wav, webm, and webp.
- Start the conversion. The tool does not auto-run and does not update its output while you make changes, so you must explicitly press the conversion control after the file and target are ready. The tool does not state that control’s visible label.
- Wait for the browser-based processing to finish. If FFmpeg cannot be loaded or the conversion fails, the tool reports the corresponding error described below.
- Download the completed file when the result is available. The download action is supported, but the tool does not identify the exact wording of the download control or guarantee a particular output filename.
Worked example
Suppose you have a PNG image named product-photo.png and need a JPEG version. Choose the file from your computer using the file input, or drag product-photo.png onto the drop area. Because the source belongs to the image/* category, it is an accepted input. Select jpg or jpeg as the desired target variant, then start the conversion by pressing the conversion control.
The tool loads and runs the FFmpeg-based conversion in the browser. There is no upload request for product-photo.png because the implementation has no backend endpoints. Once processing completes, the result is available for download. The expected result is a downloadable JPEG file corresponding to the selected image conversion, rather than a preview that changes while you type. The tool does not publish settings for JPEG quality, resolution, metadata preservation, color profile handling, or the exact output filename, so those details should not be assumed. If the source exceeds 500 MB, the operation cannot proceed under the published file-size limit. If FFmpeg cannot load, the browser reports “Failed to load FFmpeg. Please check your connection and try again.”
A similar workflow applies to an MP4 video converted to webm or a WAV sound file converted to mp3. The general pattern is to provide an accepted media file, choose one of the listed variants, initiate the operation, and download the output. The tool does not establish which conversions are possible between every pair of variants, so it does not support a claim that every listed source-to-target combination is guaranteed to succeed.
Limitations and edge cases
- The maximum file size is 500 MB. A larger file triggers the file-too-large path and is not processed. If a larger file must be converted, use a different tool designed to handle it.
- Only video/*, audio/*, and image/* files are accepted. The exact error for an unsuitable file is “Unsupported file type. Please upload a video, audio, or image file.” A document, archive, or other unrelated file is outside the supported input categories.
- The tool is not real-time or live. It does not provide a continuously updating result, and a conversion must be started explicitly rather than running automatically after a selection.
- No sample or built-in example file is supplied. To test the tool, you need your own video, audio, or image file.
- No state is remembered between visits. If you need repeatable conversion settings, a maintained preset system, or a history of previous jobs, use a different tool with those features.
- There is no clipboard-copy action. The supported way to retain the result is to download it.
- The tool lists “code cap: 500” as a separate published limit, but it does not define whether that value applies to source lines, characters, or another implementation constraint. It should not be treated as an additional user-facing media-size limit without further documentation.
- Conversion can fail even when the file type and size are acceptable. For a failed operation, the tool uses the message “Conversion failed: ${e.message}. Try a different format or smaller file.” A different output variant or a smaller source may address the condition that caused the failure.
Troubleshooting
- Problem: The tool says “File too large. Maximum is ${MAX_FILE_SIZE / 1024 / 1024}MB.”
Fix: The published maximum is 500 MB, so reduce the source file below that limit and try again. Use a different tool if the media must remain larger than 500 MB. - Problem: The tool says “Unsupported file type. Please upload a video, audio, or image file.”
Fix: Select a file belonging to the video/*, audio/*, or image/* category. The tool does not process unrelated file types. - Problem: The tool says “Failed to load FFmpeg. Please check your connection and try again.”
Fix: Check the browser’s network connection and retry. Processing depends on the FFmpeg library being available to the page. - Problem: The conversion stops with “Conversion failed: ${e.message}. Try a different format or smaller file.”
Fix: Try another listed output format or use a smaller source file. If the problem persists and you need advanced encoding controls or broad codec coverage, use a desktop or specialist converter instead. - Problem: Selecting a file does not immediately produce a result.
Fix: The tool does not auto-run. Explicitly start the conversion with the available control and wait for processing to finish. - Problem: The converted result is no longer available after the page is revisited.
Fix: Download the result before leaving. The tool does not use local storage and does not remember state between visits.
Frequently asked questions
Does the tool upload my media to a server? No. The implementation processes files entirely in the browser and calls no backend endpoints. The source media remains local to the browser-based operation.
Which file types can I select? The file input accepts video/*, audio/*, and image/*. The available variants are aac, audio, image, jpeg, jpg, mp3, mp4, ogg, png, video, wav, webm, and webp. The tool does not provide a complete matrix showing every supported source-to-target conversion.
What is the largest file I can process? The published maximum is 500 MB. Exceeding that limit produces a file-too-large error. The tool does not state a separate limit for output size or duration.
Does the conversion begin automatically? No. There is no auto-run capability. You must press the conversion control after selecting the file and desired variant.
Can I copy the result to the clipboard? No. Clipboard copying is not a supported capability. Download the converted file instead.
Does the tool remember my files or settings for the next visit? No. It does not use local storage and does not retain state between visits. Download anything you need to keep.
Can I use the tool to test the workflow without supplying my own file? No. There is no built-in sample or example data. Supply a video, audio, or image file from your computer.
Is the result updated live while I configure the conversion? No. The tool is not live or real-time, and it does not update output live as you type. It produces a result after an explicitly started conversion.
When should I use a different media tool? Use a different tool if the source is larger than 500 MB, you need guaranteed support for a particular codec pair, you need advanced quality and bitrate controls, or you require saved presets and job history. This browser tool is best suited to straightforward local conversions from a video, audio, or image file to one of its listed variants.