What it does
IP Leak Test checks whether an IP address is exposed and looks for signs of WebRTC, DNS, and VPN leaks. It is intended for users who want to assess whether their current network setup is revealing identifying information that they did not intend to disclose. The tool has one operating mode and does not offer separate WebRTC-only, DNS-only, or VPN-only tests.
The test is not completely self-contained in the browser. Although it performs processing locally in the page, it also calls the backend endpoint /api/tools/ip-lookup, so completing a test requires a connection to the service. The browser does not update the result automatically while text is being entered. A test begins only after the user activates the Retry Test control. Results can be copied, but the tool does not provide a file download, local history, or a built-in example that can be run without supplying text.
When to use it
- Checking a network before sensitive work: Run the test when you are about to use an online banking service, a private account, or another site where an unexpected IP exposure may matter.
- After changing VPN or proxy settings: A new route can change which address appears outside the tunnel. Testing again helps confirm whether the new connection behaves as expected.
- Troubleshooting browser-based leak warnings: If another website reports a WebRTC or DNS-related exposure, use this tool to obtain a separate indication of the current situation.
- Comparing network locations: Run the test on different connections, such as a home network and a mobile hotspot, to see whether the detected address or leak findings differ.
- Verifying whether an address appears exposed: Enter a specific address when you need to check the result for that value rather than relying only on an automatic site visit.
- Investigating inconsistent behavior after reconnecting: Reconnect to a network and use Retry Test to request a fresh result instead of relying on an earlier display.
How to use it
- Open the IP Leak Test page. The tool uses a single interface rather than separate modes for WebRTC, DNS, and VPN checks.
- Enter or paste the relevant text into the input area. The tool accepts text directly; it is designed around values that are pasted or typed in the browser.
- Review the text before submitting it. Because the test makes a backend request, the submitted value and relevant request information are transmitted over the network.
- Click Retry Test. This is the only named action in the interface. The page does not begin or refresh the test automatically as you type.
- Wait for the result. The browser receives the lookup result from the service and displays the outcome of the leak check.
- Copy the result if needed. The interface provides a copy capability, allowing the displayed result to be transferred to the clipboard. There is no download option for saving it as a file.
- Run the test again after changing your connection or VPN configuration. Click Retry Test to request another result under the new conditions.
Worked example
Suppose you are connected through a VPN and want to test the address assigned to the connection. Enter the address shown by your VPN client, such as 192.0.2.1. That address is from a documentation-only range, but it illustrates the input step; use the actual address shown by your own connection when performing a real check.
After entering the value, click Retry Test. The page sends the lookup request to /api/tools/ip-lookup and waits for the response. You should then see the tool's IP leak test result, including its assessment of whether the tested address is exposed and whether WebRTC, DNS, or VPN leak conditions are present. The tool does not publish a fixed field-by-field output template, so the exact labels and wording of the displayed result should be taken from the page rather than assumed.
If the result is relevant to a support ticket or private record, use the interface's copy control to copy it. There is no file-download action, and the tool does not retain its state between visits. If you switch networks, disable a proxy, or reconnect the VPN, the earlier result may no longer describe the current connection. Return to the page, enter the new address if it has changed, and click Retry Test again.
Limitations and edge cases
- The result depends on a backend request. The page does not perform the lookup entirely in the browser. Firewall rules, proxy configuration, an unavailable service, or a blocked request can prevent a result from appearing even when the page itself loads normally.
- It is a point-in-time check, not a continuous monitor. The output does not update live while you type, and there is no automatic monitoring mode. Use Retry Test whenever the network or VPN state changes.
- No result history is maintained. The tool does not remember state between visits. If you need a dated sequence of results, copy and record each one outside the tool.
- There is no file-based workflow. Input is limited to text that is pasted or typed. The interface does not read a saved document or attachment, so keep the relevant address available as text.
- There is no downloadable report. Although a result can be copied, it cannot be exported as a file by this tool. Use a different utility if you require a formal downloadable report.
- The tool has one combined mode. It does not provide dedicated modes for independently configuring a WebRTC, DNS, or VPN test. For highly specialized diagnostics, use a browser privacy diagnostic or network-analysis tool that exposes individual test controls.
- No numeric limit is published. The tool does not state a maximum length for the entered text or a numeric range for accepted addresses. Do not rely on an unstated limit; if you need strict input validation, perform it before submission.
Troubleshooting
- Problem: No result appears after entering text.
Fix: Click Retry Test and check that the browser can reach the service. The test depends on a backend lookup, so an offline browser or blocked network request will not produce a complete result. - Problem: The result appears to describe an older network configuration.
Fix: Reconnect the VPN, proxy, or network, confirm that the entered address is still current, and click Retry Test again. The tool does not refresh its result automatically. - Problem: The displayed result differs from the address expected on the current connection.
Fix: Check the address shown by the VPN or proxy client and enter that value again. Also verify that DNS, WebRTC, or traffic-routing settings have not changed since the previous test. - Problem: You need to preserve the result as a file.
Fix: Use the interface's copy capability and paste the result into a separate application that can save it. This tool itself does not offer a download. - Problem: You want to run several tests for comparison.
Fix: Copy each result as it is produced and record it separately. The tool has no built-in history or sample data, and it does not remember previous visits. - Problem: You need to test only one leak mechanism in isolation.
Fix: Use a different browser diagnostic tool with separate WebRTC, DNS, and VPN controls. IP Leak Test offers a single combined test mode.
Frequently asked questions
Does IP Leak Test run entirely in the browser?
No. It performs local processing in the page, but it also calls /api/tools/ip-lookup. A working result therefore depends on communication with the backend service.
Is the entered address processed only on the local device?
Because the tool calls a backend endpoint, it is not a local-only lookup. The submitted text is transmitted to the service as part of the request. The tool does not publish a detailed retention policy, so do not assume that the service keeps no record.
What can I enter?
Enter or paste text into the browser interface. The interface does not provide a file input, and the tool does not publish a specific character limit or accepted-value format.
Does the result update while I type?
No. The output is not live. Click Retry Test to initiate or repeat the lookup.
Can I save the result?
You can copy it through the interface's copy capability. The tool does not offer a file download, and it does not maintain a history of earlier results.
Does it test WebRTC, DNS, and VPN leaks?
Yes. The tool's purpose is to detect those forms of exposure, but they are assessed through one combined mode rather than through separate selectable tests.
Will the result remain available on my next visit?
No. The tool does not remember state between visits. Copy any result you need to retain.
When should I use a different tool?
Use a dedicated browser privacy diagnostic when you need isolated WebRTC, DNS, or VPN checks. Use a network-monitoring application when you need continuous detection, and use a general document or reporting application when you need downloadable records.