The short answer
Use the image resizer when the image is physically too large for its intended place on a page. It changes the pixel dimensions through the Width (px) and Height (px) fields, reducing the number of pixels the image contains. Use the image compressor when the dimensions are already appropriate but the encoded file is too heavy. It supports JPEG, PNG, and WebP output with a Quality: % control. Use the image format converter when the deliverable needs a different format, with Target Format set to JPG, PNG, or WebP.
These tools pull different levers, so the order matters. Resizing first can eliminate pixels that never needed to be encoded. Compressing next can reduce the remaining file through encoding quality. Converting afterward can place the result in a suitable delivery format, although changing format by itself does not guarantee a smaller file. For a large photograph destined for the web, the common sequence is resize, then compress, then convert only if the required format is still not the one you have.
What each tool actually does
- Image Compressor — This tool accepts uploaded images, offers JPEG, PNG, and WebP modes, and exposes a Quality: % setting. It supports file upload, drag-and-drop, local processing, and downloading the result. It is not a live or real-time editor, and it has no clipboard output, sample data, or local storage. Its published size limits include a 20 MB file limit, along with listed limits of 3169 KB and 3630 KB. The interface reports failures such as “Compression failed. Please try again.”, “File exceeds 20MB limit”, and “Please upload an image (JPG, PNG, WebP, GIF)”. Its real limitation is scope: it is for changing the encoding of an image, not for setting new pixel dimensions or providing a general-purpose format conversion workflow with GIF or BMP as output targets.
- Image Format Converter — This tool accepts JPG, PNG, WebP, GIF, and BMP uploads and can target JPG, PNG, or WebP through the Target Format control. It also exposes Quality: %, plus Remove file and Convert Another. It supports drag-and-drop, local processing, and result downloads. Unlike the other two tools, it has no backend calls and is explicitly described as using plain browser APIs for pure client-side operation. It does not provide live editing, clipboard output, sample data, or local storage. Its published limits are listed as 3 bytes, 4 chars, and 50 MB, with a 50 MB upload limit in its error messaging. If a selected conversion cannot produce image data, it reports “canvas produced no image data”; other messages include “Conversion failed. Try a different format.” and “Failed to load image. The file may be corrupted.”
- Image Resizer — This is a single-mode tool for changing image dimensions. It exposes Width (px) and Height (px), together with Remove file and Resize Another. It accepts image uploads, supports drag-and-drop and local processing, and provides a downloadable result. It does not offer live editing, clipboard output, sample data, or local storage. The published file limit is 20 MB. It can report “Please enter valid width and height values”, “Please upload a file first”, and “Download failed. Please try again.” Its real limitation is that it addresses geometry rather than encoding: there is no documented target-format control, no quality control, and no way to use it to convert GIF or BMP into another format.
When to use each one
- Image Compressor
- Use it when a photograph has the right dimensions but still produces a file that is too large for a web page, content management system, or similar delivery workflow.
- Use it when you want to choose among JPEG, PNG, and WebP encoding and adjust the visible Quality: % setting.
- Use it when preserving the current pixel dimensions matters more than changing them.
- Image Format Converter
- Use it when the receiving system requires JPG, PNG, or WebP but the source is in another accepted format, including GIF or BMP.
- Use it when you need the explicit Target Format workflow rather than a compression-oriented or dimension-oriented operation.
- Use it when the source and target are both supported and the main objective is format compatibility.
- Image Resizer
- Use it when a web layout needs a smaller width and height, such as reducing a full-size photograph to a content-area or thumbnail size.
- Use it when the image contains more pixels than the destination can use.
- Use it as the first step when both dimensions and encoded file size need attention, because unnecessary pixels can be removed before quality settings are considered.
Side by side
- Primary input and output distinction — The compressor and resizer both accept image uploads broadly, while the converter has an explicit list of accepted input types: JPG, PNG, WebP, GIF, and BMP. All three can download a result. The compressor supports JPEG, PNG, and WebP modes. The converter targets JPG, PNG, and WebP. The resizer has one operating mode and changes Width (px) and Height (px); its output-format choices are not documented.
- What changes — Compression acts on encoding quality, with the compressor presenting JPEG, PNG, and WebP modes and a Quality: % control. Conversion changes the selected target format, also with a Quality: % control available. Resizing changes pixel dimensions. These are not interchangeable operations. A converter does not establish new dimensions, a resizer does not expose a target-format choice, and neither dimension editing nor format selection is documented as a feature of the compressor.
- Upload limits and accepted formats — The compressor and resizer each publish a 20 MB limit. The converter publishes a 50 MB limit. The converter explicitly names JPG, PNG, WebP, GIF, and BMP as acceptable inputs, while the other tools use broader image acceptance and name JPG, PNG, WebP, and GIF in their upload messages. The compressor’s additional published figures of 3169 KB and 3630 KB are part of its tool, but the tool does not explain what distinct cases they govern.
- Processing behavior — All three are marked as local-processing tools and use plain browser APIs. The converter is explicitly pure client-side with no backend calls. The compressor lists a tool-use backend endpoint, while the resizer lists upload, resize, tool-use, and download endpoints. That distinction is worth noting if the implementation itself matters, although it does not change the stated client-side processing capability.
- Interaction model — The converter offers Convert Another and Remove file; the resizer offers Resize Another and Remove file. The compressor’s extracted interface contains the Quality: % label. All three support upload and drag-and-drop, but none is marked live or real-time. None provides clipboard copying, sample data, random generation, secure-random behavior, or local storage.
- What each is genuinely bad at — The compressor is the wrong choice when the real requirement is a specific width and height. The converter is the wrong choice when the goal is guaranteed dimension reduction or when a GIF or BMP must remain that format. The resizer is the wrong choice when the requirement is a specific output format or an encoding-quality adjustment. None of the three is a live visual editor, and the tools do not establish batch conversion, manual crop controls, metadata editing, or color-management controls.
A worked example
Suppose you have a 4000-pixel-wide JPEG photograph that needs to appear in a web article whose content column is 1200 pixels wide. The image is both physically oversized and too heavy. Open the image resizer, upload the file, and enter the desired Width (px) and Height (px) values. The resizer’s job is to reduce the pixel dimensions, and the download gives you a smaller geometric image without pretending to change format or tune encoding quality.
If the resized photograph is still too large, open the image compressor with that result. Select the appropriate JPEG, PNG, or WebP mode and adjust Quality: % until the encoded size meets the site’s requirement. The quality control affects the encoding stage; it does not change the width and height you just established. If the publishing system specifically requires WebP and the compressed result is not in WebP, finish with the image format converter. Upload the file, set Target Format to WebP, and use the available Quality: % control if needed.
That order removes unwanted pixels first, then controls the encoding of the image that remains, and converts only for a real compatibility requirement. If the dimensions are already correct, skip the resizer. If the format is already correct, skip the converter. Converting earlier is not automatically harmful, but it adds a step and can obscure which operation actually solved the size problem.
Where these tools do not help
- They do not provide a live visual preview of compression or resizing, because all three are marked as not live or real-time.
- They do not expose crop coordinates, aspect-ratio locking, metadata removal, color-profile editing, or other detailed image-editing controls.
- They do not establish a guaranteed final file size. A target size may require several deliberate combinations of dimensions, format, and quality, and the tools do not publish a size-target control.
- They do not turn the resizer into a format converter: it has no documented Target Format control.
- They do not make the converter a dimension editor: its documented controls concern conversion and quality, not width and height.
- They do not offer a general animation-editing workflow, batch-processing interface, project history, profiles, plugins, themes, or persistent storage in the documented capabilities.
Frequently asked questions
Should I compress, convert, or resize first? Resize first when the image is larger than its destination requires. Compress next if the remaining file is still too heavy. Convert last when a particular output format is required. Each step addresses a different property of the image.
Does resizing always make the file smaller? Reducing the number of pixels generally gives an encoder less image data to store, but pixel dimensions and file size are not the same thing. The final size also depends on the encoding and its settings. The resizer itself changes only the documented width and height.
Does converting to WebP always reduce the file size? No. WebP can be a useful web delivery format, but changing format does not guarantee a smaller result. The converter provides a Quality: % control, so the encoded output can still be evaluated against its quality setting.
Can the image compressor change an image’s width and height? No. The compressor’s documented modes and controls concern JPEG, PNG, and WebP encoding plus Quality: %. Use the resizer when dimensions are the actual problem.
Can the image converter resize a picture? No documented width or height controls are provided. It converts accepted inputs to JPG, PNG, or WebP through Target Format; use the resizer separately if dimensions need to change.
What file types can I convert? The converter accepts JPG, PNG, WebP, GIF, and BMP uploads, while its target formats are JPG, PNG, and WebP. The tools do not establish any special handling for animated GIF content.
Are these live browser editors? No. Upload and drag-and-drop are supported, and all three are marked for local processing, but none is marked live or real-time. Results are produced through the separate operation and made available for download.
Do the tools save my work between visits? No. Their tools state that they do not use local storage. A produced result must be downloaded if it is needed after the current session.